HDPE Properties: High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good. HDPE Application: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc. Mass density - g/cm³ - 0.941-0.959 Melt flow Rate(190 Centigrade /2.16kg) - g/10min - ≤1.0 Tensile yield strength - MPa - ≥19.0 Flexural modulus - Mpa - ≥965 Elongation@ break - % - ≥400 Impact Embrittlement temperature - Centigrade - MAX -118 Dielectric Constant - 100KHZ - 2.32 1MHZ - 2.31 Loss Tangent - 100KHZ - MAX 0.0001 1MHZ - MAX 0.0001 Volume resistivity - OHM-CM - MIN 1x10 15