**MILL CRUSHER FOR STYROFOAM KP2** We are the originator, designer and manufacturer of grinders, industrial machines, grinders, grinding and mixing machines and steel furnaces. Thanks to many years of experience, we can offer competitive prices and high quality of our products. We are able to make a machine according to the customer's order and configuration, according to his needs. We use various motors, from 1 to 12 kW, 3-phase, 400V. At this auction we present a grinder model KP2. \- TECHNICAL PARAMETERS OF THE KP2 MILL: 400V three-phase electric motor with a power of 5.5 kW 1:0 switch, power cable, 5-pin 16A plug grinding drum with a diameter of 500 mm with a hopper two granulate outlets with rubber bands unidirectional rotary knife 14 mm diameter sieves located around the grinding drum work efficiency approximately 4m3/h hopper filling \= The machine is available immediately. The crusher allows bagging of the obtained granules directly into bags or plastic sleeves, which are attached to the dumps using flexible rubber lines. \- A Styrofoam grinder may have different efficiency, depending on the needs and the motor, knife and sieves used. Crusher with other capacities are presented in our other advertisements. **VIDEOS SHOWING THE OPERATION OF THE MILL:** **https://www.youtube.com/watch?v=aYnqvtTYV7A** **https://www.youtube.com/watch?v=R1Cyf430nzU** **https://www.youtube.com/watch?v=p\_nWQOeqqx8** **https://www.youtube.com/watch?v=RRu4CCrhSt8** \= ATTENTION!!! Each machine is made to order. Before purchasing, be sure to contact the Seller to discuss the details and complete the official order form (we cannot proceed without it). \-- WE ALSO DO: SHREDDER KP1: with a hopper closed with a flap, a smaller engine, other sieves and a knife. Its efficiency is approximately 2 m3/h KP3 INDUSTRIAL LINE: feeder + shredder + silo. Its efficiency is up to 100 m3 per 6 hours of work! KP04 SHREDDER WITH AIR EXTRACTION: shredder + air extraction. Its efficiency is approximately 10 m3/h. Machines available on our other auctions! \- The effect we obtain from grinding pure Styrofoam is shown in the photo at the auction - irregularly shaped balls. \- \- We offer warranty and post-warranty service, we are the designer and originator of the KP1, KP2, KP3, KP04 crushers. We constantly sell: knives for each grinder we offer: hardened, rotary, low-temperature 70cm and 100cm foil sleeves on a 30kg roll and ready-made foil bags 235x100cm at attractive prices for customers who purchased the grinder motors and bearings \- \- Do you have any questions? Need another machine? Contact us!